Industry Industry

Processing

DSC_0821

Our processing

Globalsider has five cutting lines that complement each other, enabling the manufacture of strips with widths from 4 mm to 600 mm and thicknesses from 0.3 mm to 6 mm. We can manufacture very tight and thick strips (e.g., 18×5 mm - 19×6 mm) with closed dimensional tolerances on the cut for width and thickness.

A banding and squaring line, which is capable of operating on thicknesses from 0.8 to 5 mm with widths from 20 to 600 mm and lengths from 50 to 6000 mm.

A calibrating and edging mill enables the supply of strips with a maximum width of 100 mm and thicknesses from 2 mm to 5 mm with particularly tight tolerances of +/- 0.01 mm thickness. It is also possible to supply edged strips with a maximum width of 100mm and thicknesses from 1.5 mm to 6mm.

The cutting lines

DSC_0532
DSC_0534
DSC_0662
DSC_0856
DSC_0646
DSC_0830
DSC_0027
DSC_0809

Banding and squaring line 

DSC_0783
DSC_0786

Calibration and edging mill

DSC_0735
DSC_0731

Pneumatic arm manipulator

DSC_0798
DSC_0795
en_GBEnglish